Thank you for being part of our journey Warm holiday wishes to you and yours
Our office will be closed from December 24th to January 4th. Phones and email will be monitored for urgent requirements.
Product Description
Indoor WiFi Bridge
Industrial WiFi Access PointSecure, quick and easy to install wireless point-to-point link
Indoor WiFi Bridge
Industrial WiFi Access PointSecure, quick and easy to install wireless point-to-point link
Description
ACKSYS offers a secure wireless solution that is quick and easy to install, allowing you to create a wireless bridge between two independent Ethernet networks, two separate devices (PC, camera, printer, etc.) or two buildings by simply programming two Airlink_V2 standard units.
Indoor use: wall mounting or DIN rail
Outdoor use: installation in an outdoor cabinet with antennas adapted to the environment and to the distance to be covered (consults the list of additional accessories).
- Wireless connection of 2 networks or remote devices
- Easy commissioning using downloadable configuration files
- Secure link
- High speed communication up to 250 Mbps (depends on environment and distance)
- WaveOS operating system
- Power supply: +9VDC to +48VDC and PoE 802.3af
- Very compact cases, wall mounting or DIN rail
Specifications
- Ethernet Interface
1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, auto MDI/MDIX cross-over, RJ45 Ethernet interface
- WiFi Interface
1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 2.4 / 5 GHz, ANI (Adaptive Noise Immunity)
- WiFi Radio Data Rate
802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps)
- Operating Frequencies
ISM: 2.4-2.483 GHz (up to 14 channels)
UNII: 5.15-5.25 GHz (up to 4 channels)
UNII-2: 5.25-5.35 GHz (up to 4 channels)
UNII-2 ext: 5.470-5.725 GHz (up to 11 channels)
UNII-3: 5.725-5.825 GHz (up to 4 channels)
Supports DFS and TPC
- Output power
2.4 GHz: 23.5 dBm (aggregate) / 5 GHz: 21 dBm (aggregate)
- Sensitivity max.
2.4 GHz: -94 dBm / 5 GHz: -96 dBm
- Radio connectors
2 x RP-SMA
- Security
Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE), VPN (OpenVPN), SNMP V3, client isolation in AP mode
- WiFi Modes
Access point, client, MESH (IEEE 802.11s), infrastructure, fast roaming (less than 30 ms), WMM QoS
- Ethernet Networking
Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay
- Ethernet Routing
Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router
- Administration
http, https, SNMP agent (V1, V2C, V3), WaveManager administration software
- LEDs Signaling
Radio: activity - status | Ethernet: link 10/100/1000 - activity | Power: on-off
- Power supply
+9VDC to +48VDC, 3-pin Phoenix connector & PoE Powered Device 802.3af (from model V2)
- Consumption
IDLE mode: 1.7 W / Maximum average: 5.8 W / Recommended power supply: 7 W
- Dimensions & weight
Compact case L: 103 x l: 67 x h: 24 mm, weight 225 g
- Standards and certifications
CE (RED)
Safety: EN 62368-1:2014+A11, EN62311
EMC: EN301-489-1, EN301-489-17
Radio: EN 300 328 2.1.1 (2.4 GHz), EN 301 893 2.1.1 (5 GHz, DFS)
FCC
Radio: FCC ID Z9W-RMB
Environmental
Shocks and vibration: EN 61373 (CAT 1 CLASS B)
- Environment
IP30 Operating temperature: -20°C to +60°C , storage: -40°C to +85°C, humidity: 0% to 99% (non-condensing)
- Warranty
5 years